Phrozen Light Curing Putty
Phrozen Light Curing Putty is a gel-like material that cures rapidly under UV light. Works well for model repairs and modifications. Phrozen’s Light Curing Putty is easy to sand and paint on too. Perfect your 3D printed models with speed and precision.
- Restore broken 3D model parts to their original shape.
- Easily fill gaps and holes in your 3D models.
- After curing, Light Curing Putty is easy to sand and paint.
- Applicable on cured resin and plastic.
How To Use
- Thoroughly clean the surface and remove any dust before application.
- Use a wooden stick to apply an appropriate amount of putty.
- Use Isopropanol Alcohol to smooth out the putty and clean-up the excess.
- Use Phrozen’s Cure Beam or other curing lamps with LED wavelengths of 395 nm or above for 15-30 seconds.
- For the best result, cure putty at a 1 cm distance to ensure that the light can enter through the bottom of the model.
What Are The Benefits?
- Cures in 15 seconds, allowing for quick and efficient model modifications.
- Fixes and repairs broken parts with accuracy.
- With gel-like characteristics, Light Curing Putty is mess-free and easy to apply.
- After fully cured, the putty is easy to paint and sand according to your needs.
Precautions
- Avoid direct exposure to sunlight.
- Wear gloves when handling the product.
- For thickness between 1-8mm, cures with UV light for 15 seconds – 3 minutes. Curing time depends on the thickness.
- Avoid direct contact with the skin.
- In case of eye contact, rinse thoroughly and seek medical attention immediately.
- After a long exposure time, the putty may have a higher temperature. Handle this with caution.
- Keep away from children.
