Phrozen Water-Washable Dental Model Resin
£80.00 (incl. VAT)
Phrozen Water-Washable Dental Model Resin delivers a high level of post-curing accuracy with minimal shrinking. Its water-washable formulation makes it easy and safe to handle even in office environments, providing comforts for both patients and practitioners.
Phrozen Water-Washable Dental Model Resin
Phrozen Water-Washable Dental Model Resin delivers a high level of post-curing accuracy with minimal shrinking. Its water-washable formulation makes it easy and safe to handle even in office environments, providing comforts for both patients and practitioners.
Ideal for printing
- Crown and Bridge Models with removable dies.
- Implant Analog Models.
- Diagnostic Models.
What are the benefits?
- High Accuracy. With a Medit intraoral scanner, more than 90% of variation falls within ±0.05mm on dental 3D models created.
- Remove Residue with Ease. Water-Washable Resin is designed to be easily rinsed by water which means that you no longer need ethanol or IPA to clean up your resin 3D prints.
- Low Shrinkage & High Precision. With low deformation or shrinkage, this resin is ideal to create perfect dental models for removable dies.
- Low Viscosity & Low Odour. Phrozen Water-Washable Dental Model 3D Printing Resin are easy to print and are easily post-processed due to their low viscosity. Meanwhile, their low odour will not make your place smell.
Trusted by Dental Industry Leaders
Print fast with advanced accuracy
Precautions
- Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
- After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
- Keep resin away from kids and away from direct sunlight exposure.
- Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
- DO NOT dump resin. Please cure it and treat it as general plastic garbage.
Cleaning
After removing the printed object from the building stage, use an ultrasonic cleaner and clean water for 5 minutes to remove uncured resin from the surface. Make sure that the object has been thoroughly cleaned, then leave it in a dark place for up to 30 minutes or use an air gun to immediately dry the printed object.
Avoid rubbing the printed object as it may cause over-cleaning and affect precision tolerances.
Post-Curing
Resin Specification
Resources / Downloads
Add a review
Reviews
There are no reviews yet.