Crestaform Rapid 2.0 3D Printing Resin
Introducing the Crestaform Rapid 2.0 3D printing resin from Scott Bader– a general-purpose resin formula that offers lightning-fast print speed, superior print quality, vibrant colours, robust mechanical capabilities, and improved user-friendliness. Ideal for crafting high-resolution models, intricate figurines, rapid prototyping, and crafting exquisite jewellery pieces. Available in Clear or White.[/vc_column_text][/vc_column][/vc_row][vc_row css=”.vc_custom_1697799034418{padding-bottom: 40px !important;}” conditional_render=”%5B%7B%22value_role%22%3A%22administrator%22%7D%5D”][vc_column width=”1/2″][vc_column_text]
Key Benefits
- Excellent mechanical performance
- High reactivity and printing speed
- Rigorously tested to ensure optimal performance
- Globally available technical support
- Scott Bader is a reputable manufacturer with over 100 years of experience and expertise
How To Use Crestaform Rapid 2.0
- Always shake or mix the resin thoroughly before use.
- Open the container and pour the appropriate amount of resin into the tank according to the size of the printer model • make sure to not spill the resin onto the printer, LCD screen or anywhere outside of the resin tank.
- If not used for a long time, please filter the resin and pour the resin into the storage container.
Recommended Cleaning
- Soak the print in a clean IPA bath for a minimum of 2 minutes. Alternatively, rinse the part with IPA until all the visible uncured resin has been removed. Reusing IPA in multiple cleans can reduce the cleanliness and clarity of a print.
Recommended Post-Curing
- Post-cure as soon as possible after completion of printing.
- Post-cure every print for a minimum of 10 minutes under a dedicated UV curing lamp operating at 405 nm wavelength. Alternatively, you can leave the print to cure for a minimum of 2 hours under direct sunlight.
- Temperature-assisted UV curing will increase the rigidity of the print.
Typical Printing Parameters*
*For DLP printers, it is recommended that light power is reduced to around 2.5mW/cm2[/vc_column_text][/vc_column][/vc_row]
