IQ Resin is a tough and platinum silicone friendly resin for Liquid Crystal Display (LCD) and Digital Light Processing (DLP) 3D Printers. High impact strength and exceptional scratch resistance. Perfect for manufacturing functional prototypes and mould making. A translucent liquid curing to a milky white polymer during polymerization.
Liquid Properties
– Appearance: Translucent Liquid
– Viscosity: 800cps at 25°C
– Density: 1.18 g/cm³
– Critical Energy: 14.47 mJ/cm²
– Depth of Penetration: 0.56 mm
Polymer Properties
– Tensile Strength: 28 MPa
– Tensile Modulus: 1.0 GPa
– Elongation at Break: 15-25%
– Flexural Strength: 38 MPa (No Break)
– Flexural Modulus: 1.0 GPa
– IZOD Impact: 43 J/m
– Shore D Hardness: 69
– Water Absorption: 0.6%
– HDT-B 0.45 MPa: 45°C
– Degradation Temp: 200°C
Storage
Store resin at room temperature away from direct sunlight. Shake well before use. DO NOT dump resin. Please cure it and treat as general plastic waste, disposing in designated container.
Please Note: Images are for illustrative purposes only. Please review your product selection before purchase.
