Water Washable Dental Model Beige 1KG
Phrozens’ Water-Washable Dental Model Resin is specifically developed to rapidly produce highly accurate dental models.
You can easily wash your print with water if alcoholic solvents aren’t available for you.
What Are The Benefits?
- High Accuracy – With a Medit intraoral scanner, more than 90% of variation falls within ±0.05mm on dental 3D models created by Water-Washable Dental Model Resin.
- Remove Residue With Ease – Phrozen Water-Washable 3D Printing Resin is designed to be easily rinsed by water which means that you no longer need ethanol or IPA to clean up your resin 3D prints.
- Low Shrinkage & High Precision– With low deformation or shrinkage, this resin is ideal to create perfect dental models for removable dies.
- Low Viscosity – Phrozen Water-Washable Dental Model 3D Printing Resin is easy to print with and can be post-processed easily thanks to its low viscosity levels.
- Low Odour – Say bye-bye to pungent smells as Phrozen Water-Washable Dental Model 3D Printing Resin won’t make your place reek of resin fumes.
Specifications
- Weight: 1kg per bottle
- Density: 1.10 g/cm3
- Viscosity: 60-100 cP
- Surface Hardness: 76 Shore D
- Flexural Strength: 92 MPa
- Flexural Modulus: 1875 MPa
- Tg：65 °C
Precautions
- Make sure to store resin at room temperature. Store in dark and ventilated conditions.
- After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
- Keep resin away from children and away from direct sunlight exposure.
- Wear gloves and masks when using resins. If this chemical comes in contact with the skin or eyes, wash with plenty of water and seek medical attention.
- DO NOT dump resin. Please cure it and treat it as general plastic garbage.
