Phrozen Dental Ortho Model Resin
£130.00 (incl. VAT)
With up to 190°C heat resistance capability and 50μm resolutions, Phrozen Dental Ortho Model Resin is your best choice to print highly detailed thermoformed models for creating clear aligners and orthodontic appliances. Formulated with a pleasing matte gray finish, the low reflective surfaces help orthodontic professionals to examine all the fine details and plan patient treatments with comfort.
Please Note: This product has a lead time of 1-3 working days from placement of order
Phrozen Dental Ortho Model Resin
With up to 190°C heat resistance capability and 50μm resolutions, Phrozen Dental Ortho Model Resin is your best choice to print highly detailed thermoformed models for creating clear aligners and orthodontic appliances. Formulated with a pleasing matte gray finish, the low reflective surfaces help orthodontic professionals to examine all the fine details and plan patient treatments with comfort.
Ideal for printing
- Clear Aligner Models.
- Orthodontic Models.
Trusted by Dental Industry Leaders
Print fast with advanced accuracy
Precautions
- Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
- After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
- Keep resin away from kids and away from direct sunlight exposure.
- Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
- DO NOT dump resin. Please cure it and treat it as general plastic garbage.
Resources / Downloads
Cleaning
After removing the printed object from the building stage, use an ultrasonic cleaner and 95% alcohol for 120 seconds to remove uncured resin from the surface. Make sure that the object has been thoroughly cleaned, then leave it in a dark place for up to 30 minutes or use an air gun to immediately dry the printed object.
Avoid rubbing the printed object as it may cause over-cleaning and affect precision tolerances.
Post-Curing
Use Phrozen post-curing lamps (Cure V2, Cure Luna, Cure Mega) or other post-curing lamps with the same wavelength to cure printed objects. Cure for 30 minutes to achieve good mechanical properties and precision.
Reviews
There are no reviews yet.