Phrozen Dental Study Model Resin
Specifically formulated to print fast at an affordable price, Phrozen Dental Study Model Resin prints at an astonishing 1.5 seconds per layer, completing a full-arch model in less than 25 minutes. With the white matte finish, this resin is highly suitable as an essential diagnostic aid for cosmetic dentistry, oral surgery and orthodontics planning. Helps patients to better understand their issues and the treatment required in advance.
At under £1/model, Phrozen Study Model Resin is the lowest-priced dental resin on the market, making 3D printing in dentistry more affordable than ever.
Ideal for printing
- Study Models.
- Diagnostic Models.
- Gradual Dentition / Occlusal Treatment progress.
Trusted by Dental Industry Leaders
Print fast with advanced accuracy
Please select products in "Products" section
Please select products in "Products" section
Precautions
- Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
- After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
- Keep resin away from kids and away from direct sunlight exposure.
- Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
- DO NOT dump resin. Please cure it and treat it as general plastic garbage.
Cleaning
After removing the printed object from the building stage, use an ultrasonic cleaner and 95% alcohol for 120 seconds to remove uncured resin from the surface. Make sure that the object has been thoroughly cleaned, then leave it in a dark place for up to 30 minutes or use an air gun to immediately dry the printed object.
Post-Curing
Use Phrozen post-curing lamps (Cure V2, Cure Luna, Cure Mega) or other post-curing lamps with the same wavelength to cure printed objects. Cure for 1 minute to achieve good mechanical properties and precision. If the printed object turns yellow after secondary curing, use an oven to bake the object at 80°C for 20 minutes to remove the yellow hue.
Resin Specification
Weight
1kg per bottle
Density
1.13g/cm³
Viscosity
150-230 cps
Surface Hardness
90 Shore D
Elongation at Break (EAB)
7%
Tensile Stress at Break
28 MPa
Young's Modulus
920 MPa
Izod Notched Impact Strength
24 J/m
*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change.
Reviews
There are no reviews yet.