Phrozen Gingiva Mask Dental Resin

£105.00 (incl. VAT)

Phrozen Gingiva Mask Dental Resin is a soft material with high elasticity and dimensional stability, specifically designed for dentistry. It’s easy to trim into the desired shape, and showcase an excellent colour stability. Ideal for printing gum tissues for denture adjustments.

 

 

Purchase this product now and earn 87 Tokens!
Brands:: Phrozen
Description
Reviews
Description

Phrozen Gingiva Mask Dental Resin

Phrozen Gingiva Mask Dental Resin is a soft material with high elasticity and dimensional stability, specifically designed for dentistry. It’s easy to trim into the desired shape, and showcase an excellent colour stability.

Mainly used in conjunction with dental models, the Gingiva Mask Resin is suitable for printing gums tissue on dental implant models and crown and bridge models. Made to simulate the look and feel of oral soft tissues, it allows the technician to perfectly adjust the dentures according to the intraoral condition of the patient.

What are the benefits?

  1. Accurately simulates oral soft tissues.
  2. High elasticity & dimensional stability.
  3. Excellent colour stability.
  4. Easy to cut and trim.

Trusted by Dental Industry Leaders

Print fast with advanced accuracy

Please select products in "Products" section
Please select products in "Products" section

Precautions

  • Make sure to preserve resin at room temperature. Store in dark and ventilated conditions. 
  • After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
  • Keep resin away from kids and away from direct sunlight exposure.
  • Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
  • DO NOT dump resin. Please cure it and treat it as general plastic garbage.

Cleaning

After removing the printed object from the building stage, use an ultrasonic cleaner and isopropyl alcohol (IPA) for 10 minutes to remove uncured resin from the surface.

Make sure that the object has been thoroughly cleaned, then leave it in a cool, well-ventilated place for at least 30 minutes without exposure to light. Alternatively, you may gently apply compressed air to dry the printed object.

Post-Curing

Put the printed object inside a glass container and pour glycerol until the object is fully immersed. Use Phrozen post-curing lamps (Cure V2, Cure Luna, Cure Mega) or other post-curing lamps with the same wavelength to cure printed objects for 30 minutes.

After curing, remove the object and rinse it with water to eliminate any slimy feeling from the glycerol. Then, wipe it clean with paper towels.

Resin Specification

Weight
500g per bottle
Density
1.18g/cm³
Viscosity
1900-2000 cps
Surface Hardness
35 Shore A
Elongation at Break (EAB)
42-46%
*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change.

Resources / Downloads

Reviews

Reviews

There are no reviews yet.

Add a review

Item added to cart View Cart Checkout