Asiga PlasWhite V2 Prototyping Resin
£165.00 (incl. VAT)
A tough ABS / Polypropylene like material, Asiga PlasWhite V2 offers high strength and detail definition for general prototyping. This resin provides the ideal base colour for painting. Asiga PlasWhite V2 is compatible with 385nm and 405nm 3D printers.
Estimated Lead Time: 2 weeks
Description
Reviews
Description
Asiga PlasWhite V2 Prototyping Resin
A tough ABS / Polypropylene like material, Asiga PlasWhite V2 offers high strength and detail definition for general prototyping. This resin provides the ideal base colour for painting. Asiga PlasWhite V2 is compatible with 385nm and 405nm 3D printers.
Overview
- Tough ABS / PP properties
- Used for general prototyping, jigs & fixtures, enclosures
- Colour: White
- Printer compatibility: 385nm and 405nm 3D printers.
- Manufactured by Asiga under ISO 13485:2016 & EN ISO 13485:2016
Precautions
- Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
- After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
- Keep resin away from kids and away from direct sunlight exposure.
- Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
- DO NOT dump resin. Please cure it and treat it as general plastic garbage.
Resources / Downloads
Resin Specification
Colour
White
Tensile Strength
51.1 MPa
Elongation at Break (EAB)
6.58%
Elongation at Yield
8.4%
Flexural Strength
86.8 MPa
Flexural Modulus
1910 MPa
Hardness (Shore D)
82 Shore D
Viscosity
343 MPa
Glass Transition Temperature
84℃
Izod Notched Impact Strength
4.97 kJ/m²
Density
1.181 g/cm³
*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change.
Reviews
Add a review
Related Products
Reviews
There are no reviews yet.