Asiga PlasGray V2 General Purpose Resin
£165.00 (incl. VAT)
Asiga PlasGray V2 presents exceptional mechanical strength properties along with superior surface finish and detail definition. The smooth matte surface finish and crisp detailing make PlasGRAY an excellent all-round prototyping resin. Asiga PlasGray V2 is compatible with 385nm and 405nm 3D printers.
Estimated Lead Time: 2 weeks
Description
Reviews
Description
Asiga PlasGray V2 General Purpose Resin
Asiga PlasGray V2 presents exceptional mechanical strength properties along with superior surface finish and detail definition. The smooth matte surface finish and crisp detailing make PlasGRAY an excellent all-round prototyping resin. Asiga PlasGray V2 is compatible with 385nm and 405nm 3D printers.
Overview
- Tough with smooth surfacing
- Used for general prototyping, jigs and fixtures, miniatures
- Colour: Light grey
- Printer compatibility: 385nm and 405nm 3D printers.
- Manufactured by Asiga under ISO 13485:2016 & EN ISO 13485:2016
Precautions
- Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
- After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
- Keep resin away from kids and away from direct sunlight exposure.
- Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
- DO NOT dump resin. Please cure it and treat it as general plastic garbage.
Resources / Downloads
Resin Specification
Colour
Grey
Tensile Strength
51.1 MPa
Elongation at Break (EAB)
6.58%
Elongation at Yield
8.4%
Flexural Strength
86.8 MPa
Flexural Modulus
1910 MPa
Hardness (Shore D)
82 Shore D
Viscosity
343 MPa
Glass Transition Temperature
84℃
Izod Notched Impact Strength
4.97 kJ/m²
Density
1.181 g/cm³
*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change.
Reviews
Add a review
Related Products
Reviews
There are no reviews yet.