Crestaform Rapid Grey Resin
£36.00 (incl. VAT)
Crestaform Rapid Grey Resin is a general purpose 3D printing resin designed for high resolution models and rapid prototyping. It is fast, strong and precise with a smooth surface finish. A high-performance 3D printing resin with superior mechanical performance and excellent reactivity.
Description
Reviews
Description
Crestaform Rapid Grey Resin
Crestaform Rapid Grey Resin is a general purpose 3D printing resin designed for high resolution models and rapid prototyping. It is fast, strong and precise with a smooth surface finish. A high-performance 3D printing resin with superior mechanical performance and excellent reactivity.
Crestaform Rapid can be used for a wide range of applications, producing a strong and rigid print when post-cured in temperature-assisted UV light. It has been specifically formulated to work with any UV LCD and DLP 3D printer that is open to 3rd party resins, including, but not limited to:
- Phrozen
- Anycubic
- Elegoo
- Creality
What are the Benefits?
- Excellent mechanical performance
- High reactivity and printing speed
- Rigorous test regime and best in industry quality assurance
- Globally available technical support
- Reputable manufacturer with over 100 years of experience and expertise
Instructions
- Always shake or mix the resin thoroughly before use
- Open the container and pour the appropriate amount of resin into the tank according to the size of the printer model
- Make sure to not spill the resin onto the printer, LCD screen or anywhere outside of the resin tank
- If not used for a long time, please filter the resin and pour the resin into the storage container
Precautions
- Always wear Personal Protection Equipment (PPE), protective eyewear and chemical nitrile gloves when handling resin
- Shake the resin well every time before you use it or decant from the container
- If spilled, please clean the spill immediately with paper towel, and Isopropyl alcohol
- Store it in its original container at room temperature, away from children, untrained personnel, direct or indirect sunlight, heat sources, sparks and open flames
- Use it in well ventilated rooms
- Use every sensible preventive precaution to avoid skin contact, spillage of resin, eye contact or swallowing.
Resin Specification
Weight
1kg per bottle
Density
1.05 - 1.07g/cm³
Viscosity
120-200 cps
Surface Hardness
84 Shore D
Elongation at Break
3.2%
Tensile Strength
53 MPa
Tensile Modulus
2.4 GPa
Flexural Strength
86 MPa
Flexural Modulus
2.5 GPa
Heat deflection temperature
60°C
*For optimum performance, Crestaform Rapid should be stored in its original container between 15°C and 30°C, in a dark and dry environment.
Resources / Downloads
Recommended Cleaning
- Soak the print in a clean IPA bath for a minimum of 5 minutes. Alternatively, rinse the part with IPA until all the visible uncured resin has been removed. Reusing IPA in multiple cleans can reduce the cleanliness and clarity of a print.
- Leave the print to dry of any residual solvent prior to post-curing.
Recommended Post-curing
- Post-cure every print for a minimum of 10 minutes under a dedicated curing UV light operating at 405nm wavelength. Alternatively, leave the print to cure for a minimum of 2 hours under direct sunlight.
- Temperature-assisted UV curing will increase the rigidity of the print.
Reviews
Add a review
Related Products
£48.00 – £346.80 (incl. VAT)
Brands:
AmeraLabs 
£42.00 (incl. VAT)
Brands:
Phrozen 
£165.00 (incl. VAT)
Brands:
Asiga 
-10%
Original price was: £45.00.£40.50Current price is: £40.50. (incl. VAT)
Brands:
Crestaform
Reviews
There are no reviews yet.