Raise3D Industrial PET GF Filament (1.75mm) 1KG
Raise3D Industrial PET GF Filament is a glass fibre-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed glass fibres enhance the rigidity, strength, heat, and chemical resistance of PET matrix. After annealing, PET GF stabilises its heat resistance at around 120°C, with tensile modulus and strength of over 4.1 GPa and 70 MPa respectively. An ideal choice with multi-colour for reliable printing of fibreglass composites for strong and cost-effective end-use applications.
Compared to glass fibre-reinforced Nylon filament, the high printability, dimensional stability, high creep resistance, and low moisture absorption makes PET GF an ideal choice for reliable glass fibre composite printing for strong and cost-effective end-use applications, such as jigs & fixture and functional parts. In addition, PET GF provides multiple colour choices.
Key Features
- Low moisture absorption
- High dimensional stability
- Heat and chemical resistance
- Creep resistance
- Multiple colours
Applications
- Automobile
- End-use parts
- Jigs & Fixtures
- Manufacture tools
- Electrical and electronics (E&E) industry
Benefits
- High Strength
- Low Moisture Absorption
- High Performance-cost Ratio
Recommended Print Settings
- Nozzle temperature (°C)
280-300°C - Bed temperature (°C)
80-100°C - Layer height (mm)
0.1-0.25 mm - Printing speed (mm/s)
35-90 mm/s - Cooling fan
ON - Drying temperature (°C)
70-80°C for 8 to 12 hours
Wide Range of Engineering Material Solutions
With a wide range of potential applications in prototyping, engineering and manufacturing, Raise3D not only offers high-end materials, but also pre-validated printing templates to ensure printing with the best results.
Reviews
There are no reviews yet.